Whoa!
Ive never been asked them questions
1 3/4" nut 2 1/4 saddle, sound hole adjustable truss rod and a very narrow D profile, not the fat V or vintage V shape, but more of the 80/90s Martin style.
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| OLF Guitar questions http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=3726 |
Page 1 of 1 |
| Author: | John Kinnaird [ Fri Nov 04, 2005 8:07 am ] |
| Post subject: | |
Lance, what neck width at the nut are you partial to. What string spacing at the bridge are you interested in? Do you prefer adjustment at the peghead end or through the sound hole? Do you like wide frets or medium frets? ( I don't have small) I am curious about whether the top was braced so that it should have a 12 fret or a 14 fret neck? I want the bridge to fall in the right place but I have enough neck material for either a 12 fret or a 14 fret neck. |
|
| Author: | John How [ Fri Nov 04, 2005 8:12 am ] |
| Post subject: | |
It's a 12 fret design John. I think the fingerboard has been cut for a 24.9" scale. |
|
| Author: | LanceK [ Fri Nov 04, 2005 8:29 am ] |
| Post subject: | |
Whoa! Ive never been asked them questions
1 3/4" nut 2 1/4 saddle, sound hole adjustable truss rod and a very narrow D profile, not the fat V or vintage V shape, but more of the 80/90s Martin style.
|
|
| Author: | John Kinnaird [ Fri Nov 04, 2005 12:52 pm ] |
| Post subject: | |
Thankee kindly yall |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|